Preface

HOME > PRODUCTS >Stenter Machines >TY-TNT

Tung Yang Hi-Air Computerized Stenter

TY-TNT

Features:

  • Integrating both American and Japanese technologies, TY-TNT has evolved into new levels, giving customers great quality in fabric finishing.
  • Central PLC control with Touch Screen Panel
  • Each chamber equipped with individual motor for width adjustment
  • Chain running speed can run up to maximum of 120m/min
  • Heat source choices are high pressurized steam, LNG or LPG, and Thermo Oil
  • Market successfully over 30 years

HOT AIR CHAMBER

  • Each hot air chamber is design to stop all fan motors in few seconds to protect the fabric when the machine is stop. This is standard and is programmed by PLC.
  • Two high efficient axial fans are installed in each chamber (3-M) for smooth and high air circulation. Each motor is controlled by AC inverter drive for infinite variable speed, and the amount of hot air circulated inside the chamber can be set easily at the TY-POD.
  • Adjusting the individual damper can regulate the volume of air circulated through the upper and lower nozzles in each chamber.
  • The velocity of airflow inside the chamber is computer control to within ±10%, and the temperature variation to within ±2°C.
  • Each exhaust fan is controlled by AC inverter drive for variable speed control. Optimum speed can be obtained easily by setting at the TY-POD to cut down heat loss and reduce energy consumption.
  • Heat source choices can be high pressurized steam, LNG or LPG, and Thermo Oil.

MAIN DRIVE SYSTEM

Main drive is built with high performance intermediate shaft, driven by AC motor with inverter control.

 

 

 

Machine Data

CHAMBER MACHINE LWNGTH mm DRIVING MOTOR CIRCULATING FAN MOTORE' HEATER ELEC. GAS.OIL HEAT CONSUMPTION X 10,000 kcal/hr GAS HEAT EXCHANCE M3h/Hr
J L TL D E
4 12000 22100 32050 15 11 8 sets 4 sets 32 -40 68
5 15000 25100 35050 20 15 10 sets 5 sets 40 - 50 85
6 18000 28100 38050 20 15 12 sets 6 sets 48 -60 102
7 21000 31100 41050 25 18.5 14 sets 7 sets 56 - 70 119
8 24000 34100 44050 25 18.5 16 sets 8 sets 64 - 80 136
9 27000 37100 47050 30 22 18 sets 9 sets 72 - 90 153
10 30000 40100 50050 30 22 20 sets 10 sets 80 - 100 170

WORKING WIDTH MACHINE WIDTH (mm)
A B C D E F G H
2000 2585 2200 4140 2000 6100 2200 3050 4350
2300 2885 2500 4440 2300 6400 2500 3350 4650
2500 3085 2700 4640 2500 6600 2700 3550 4835
2800 3385 3000 4940 2800 6900 3000 3850 5150
3000 3585 3200 5140 3000 7100 3200 4050 5350
3200 3785 3400 5340 3200 7300 3400 4250 5550
3400 3955 3600 5540 3400 7500 3600 4450 5750

Standard Electrical Equipment

PARTS MAKERS COUNTRY OF ORIGIN
A. TOUCH SCREEN PANEL FUJI JAPAN
B. PLC CENTRAL CONTROL FUJI JAPAN
C. INVERTERS FUJI JAPAN
D. AC MOTORS TECO TAIWAN
E. THERMO CONTROLLER YAMATAKE JAPAN
F. RELAY AND BREAKERS FUJI JAPAN

*Inverters can equipped with different brand as well

 

 

top