Preface

HOME > PRODUCTS >TY-NSD

Tung Yang No-Tension Shrink Dryer

TY-NSD

Features:

  • One Axial “Hi-Air” Fans with inverter per chamber
  • Individual speed control on each conveyor layer (Patented)
  • Conveyor net is made of Nomex or Kevlar Teflon coating glass fiber
  • Control by PLC for automatic conveyor net centering
  • Heat conservation chamber design (Patented)
  • Zig zag nozzle design G. Heat source choices are high pressurized steam, LNG or LPG, and Thermo Oil
  • Market successful over 30 years

NOZZLES SYSTEM

  • JAPANESE HIRANO DESIGN
  • AIR VELOCITIES FROM LEFT TO RIGHT IS WITHING +/- 10% DIFFERENCE 左右風速誤差只有+/-10%
  • TEMPERATURE FROM LEFT TO RIGHT IS ONLY +/- 2 °C
  • BALANCE AIR DISTRIBUTION OVERALL

Heat Conservation Chamber

The TY-NSD is specially design with 3 layers of conveyors, each layer with different drying features:

  • When the fabric enters the 1st layer conveyor, the surface temperature starts from 35°C and increase gradually as it moves along. Since the humidity is low at the 1st layer since the temperature has not reach the evaporation point, no exhausting action will be done on the 1st layer, to preserve heat and segregate from the 2nd layer.
  • When the fabric enters the 2nd layer, the surface temperature is reached to evaporation point. The newly design exhausting system will only exhaust this 2nd layer humidity without effecting the other layers. This will greatly increase the heat efficiency of NSD and avoid unnecessary heat lost by the exhausting action.
  • When the fabric reaches the 3rd layer, the drying process is almost done. The water content in the fabric is low and the air temperature at the 3rd layer is higher than the above layers. All the hot air in the 3rd layer will be recycled back immediately to the heat exchanger for great heat usage.

Machine Data

WORKING WIDTH
WORKING CONVEYOR ROLLER BODY
1800 1900 2000 D=4140
2000 2100 2200 D=4340
2200 2300 2400 D=4540
2300 2400 2500 D=4640
2400 2500 2600 D=4740
2500 2600 2700 D=4840
2600 2700 2800 D=4940
3000 3100 3200 D=5340

WORKING TEMP & HEAT SOURCE
HEAT SOURCE WORKING TEMP
LPG or LNG 220°C MAX
THERMO OIL 220°C MAX
STEAM 6KG/CM2 130°C MAX
ELECTRIC 220°C MAX

CHAMBER C L MAX SPEED FAN MOTOR
2 3000 5580 20 m/min C = 40hp / cl
3 4500 7080 30 m/min C = 60hp / cl
4 6000 8580 60 m/min C = 80hp cl
5 7500 10080 60 m/min C =100hp cl
6 9000 11580 60 m/min C = 120hp cl
7 10500 13080 60 m/min C = 140hp cl
8 12000 14580 60 m/min C = 160hp cl

Standard Electrical Equipment

PARTS MAKERS COUNTRY OF ORIGIN
A. TOUCH SCREEN PANEL FUJI JAPAN
B. PLC CENTRAL CONTROL OMRON JAPAN
C. INVERTERS FUJI JAPAN
D. AC MOTORS TECO TAIWAN
E. THERMO CONTROLLER YAMATAKE JAPAN
F. RELAY AND BREAKERS FUJI JAPAN

*Inverters can equipped with different brand as well

 

 

top